Get the correct size of your battery first before you replace the battery in your car . The battery size is also known as the group size can be identified by one from the four methods .
Car battery sizes can be found on the battery manuals, the manual will also indicate the manufacturer’s specification for your vehicle’s battery . A shot code is what you called for a group of letters or numbers from the battery size.
If you will refer to the labeling on your original current battery by the manufacturer, you can also find the car battery sizes from there .
Car battery sizes doesn’t always meant that it would have dimension, width and weight but it has the cold cranking amp (CCA) rating size as well . The CCA of the battery computes for the quantity of amperes that the battery can give out for 30 seconds at 0 degrees Fahrenheit .
During cold climates, it will tell you how long the battery can hold.
Check for the reverse capacity (RC) rating too . On an average of 25amps, the RC will tell you how much more the battery has before the voltage drops below 10.5V. The importance of this RC will compensate the alternator’s malfunction .
Before recharge, there should be an indicator on how long the battery could sustain and this is the AH rating from the specifications of car battery sizes.
The length of warranty, size, CCA is all printed on the battery together with all other car battery sizes information.
Apart from making the purchase yourself, you may also call or visit a car dealer that sells your make of vehicle . Or you could also have the convenience of telling the shop your vehicle model and they will come up with your correct car battery sizes’ code .
By keeping the codes from your car battery sizes, you could have a lower cost of batteries from other stores